Are you wondering how to remove rust stains from tiles? There are ways to go about it, even though these stains are incredibly stubborn and seem permanent. I’m guessing you’ve tried your usual mopping but got no results. So, what can you do to get rust stains off of tiles?
Depending on the agent used, there are different processes for removing rust stains from tiles. Firstly, you can use vinegar by applying it to the surface, leaving it for some time, and then wiping it out. Secondly, you can apply lemon juice and watch the citric acid melt away the stain over time. Lastly, try using kerosene and washing.
After you finish this article, you can kiss those frustrating stains goodbye!
My Quick Overview (30 Sec)
- Tiles in the bathroom and kitchen get wet, and where there is moisture and metal, there is often rust.
- One of the best and most natural cleaning agents available is vinegar. And it’s perfect for removing stains, like rust stains on tiles.
- If you don’t have vinegar on hand, lemon juice or kerosene can be somewhat effective against rust stains.
What You Should Know About Rust Stains
Rust may emerge just about everywhere, but it’s typically the consequence of anything metallic making contact with your tiles. This is the most common cause of rust since water does not cause ceramic or porcelain tiles to rust.
Something as ignorable as a spray can be left out in the rain is enough to cause rust stains. Identifying the cause of the rust is essential for eliminating it. When you point out the cause, you may give it immediate attention. But what do you do when you already have stains on your dazzling tiles?
How To Remove Rust Stains From Tiles
There are several ways to remove it, and each depends on the item you’re using. Below are some of the items you can use to take out these stubborn stains, along with a process for application:
1. Vinegar
Vinegar can pass for the most effective home cleanser. Its acidic nature is so strong that even the most stubborn stains, like mineral deposits, grease, and rust, come off quickly. Here’s how to use vinegar:
- Apply two or three teaspoons of vinegar to the rust spot. Relax for a few minutes, preferably five.
- Remove any debris from the floor with a clean, soft cloth.
- It is recommended that the same steps be repeated. You’ll see the rust spot on the floor go away.
2. Lemon Juice
Citrus fruits like lemons, which have a lot of citric acids, are some of the best and most common natural cleaners. Its antibacterial characteristics also make it effective in removing germs from the air and rust stains from floors. Just do the following to get rid of rust stains:
- Get some lemon juice and put it in a basin with some salt.
- Saturate the rust stain with the juice, using about a quarter of a teaspoon.
- Allow it to rest for 10 minutes. After that, brush it with a soft-bristled toothbrush. The rust stain on the floor will gradually fade as time goes on.
3. Kerosene
Kerosene is the best choice to eliminate rust from any material. It’s like vinegar but much faster and more potent. To use kerosene, follow these steps:
- The stain should be treated with two teaspoons of kerosene.
- Give it about 10 minutes to sit. Afterward, rub with a cotton cloth to bring out the shine.
- Don’t wash immediately. After 5 minutes, wipe it down with water or a paper towel and discard.
Conclusion
Rust stains are extraordinarily stubborn but being stubborn is just the beginning. They are very unattractive and can ruin the look of the tiles, no matter how tiny they appear. Now that you know how to get rid of it, they shouldn’t be a problem anymore.
